AIK-SP Stationary Automated Radio Monitoring Complex (w/o DF option)

PURPOSE:

Technical radio monitoring in remote mode from an automated control workstation (unattended remote operation without DF option).

FEATURES:

panoramic detection and mapping of received signals over a wide frequency band;
automated measurement of radio emission parameters: field strength • signal strength • frequency
bandwidth • frequency deviation • amplitude modulation index;
RF spectrum utilization monitoring: channels, frequencies, frequency bands;
storage of the information received and its transfer over communications channel (TPC/IP protocol) to RS-157 control AWS;
display of spectra of the received signals, frequency and time panoramas, radio emission parameters measurement results in RS-157 control AWS;
automatic recovery after power failure.

TYPE	AIK-CP3	AIK-CP6
detection frequency range, MHz	20-3000	20-6000
frequency range of radio emission parameters measurement, MHz	20-3000	20-6000
sensitivity from radio transmitter input, not worse than	0,6 MCW	-120 dBm
absolute measurement error: signal field strength, dB - maximum input signal frequency, Hz - bandwidth, kHz
	5	5
	60	120
	±1	±1
frequency deviation, not more than for deviation of 1 to 5 kHz for deviation of 5 to 70 kHz for deviation of 70 to 100 kHz	±0,5 kHz ±2,0 kHz ±10,0 kHz	±0,5 kHz ±2,0 kHz ±10,0 kHz
dynamic range of level measurement, dB	80 (110 att.)	80 (110 att.)
bandwidth viewing speed, GHz/s	400	400
power consumption, W	110	110
operating temperature range, °C	от 0 до +40*
weight (w/o mast), kg	15	15
DF AFS lower tier diameter	1 m	1 m
Availability of metrological certificate.