AIK-CF Stationary Automated Radio Monitoring Complex

PURPOSE:

technical radio monitoring in remote mode from an automated control workstation (unattended remote operation).

FEATURES:

panoramic detection and mapping of received signals over a wide frequency band;
automated measurement of radio emission parameters:
field strength • signal strength • frequency • bandwidth • frequency deviation • amplitude modulation index;
direction finding (correlation-phase method) of stationary radio sources (RS);
RF spectrum utilization monitoring: channels, frequencies, frequency bands;
display of bearings, spectra of the received signals, frequency and time panoramas, radio emission parameters measurement results in control AWS;
automatic recovery after power failure.

TYPE	AIK-CF 1/3	AIK-CF 3/6
detection frequency range, MHz	20-3000	20-6000
frequency range of radio emission parameters measurement, MHz	20-3000	20-6000
direction finding frequency range, MHz	30-1000	30-3000
DF method	correlation-phase
sensitivity from radio transmitter input, not worse than	0,6 MCW	-120 dBm
absolute measurement error: signal field strength, dB - maximum input signal frequency, Hz - bandwidth, kHz
	5	5
	60	120
	±1	±1
frequency deviation, not more than for deviation of 1 to 5 kHz for deviation of 5 to 70 kHz for deviation of 70 to 100 kHz	±0,5 kHz ±2,0 kHz ±10,0 kHz	±0,5 kHz ±2,0 kHz ±10,0 kHz
dynamic range of level measurement, dB	80 (110 att.)	80 (110 att.)
bandwidth viewing speed, GHz/s	1	1
power consumption, W	90	90
operating temperature range, °C	-30 ... +40*
receiving and processing unit weight, kg	10	10
DF AFS weight (w/o mast), kg	45	45
DF AFS lower tier diameter	1 m	1 m
hardware unit dimensions, mm	320х280х160
Availability of metrological certificate.